DURAN® Beaker, low form,with spout, 5000 mL
- Spout for clean pouring
- Easy-to-read scale with graduation marks to estimate the content
- Fired-on, highly durable white ceramic
Showing 97–112 of 378 results
ITEM CODE:
EM_0801 Elastic Crepe Bandage Red Line PE Packing 5×4.5m
EM_0802 Elastic Crepe Bandage Red Line PE Packing 7.5×4.5m
EM_0803 Elastic Crepe Bandage Red Line PE Packing 10×4.5m
ITEM CODE
EM_0861 Elastic Tubular Bandage, A#(5cm) x 10m
EM_0862 Elastic Tubular Bandage, B#(6.5cm) x 10m
EM_0863 Elastic Tubular Bandage, C#(6.75cm) x 10m
EM_0864 Elastic Tubular Bandage, D#(7.5cm) x 10m
EM_0865 Elastic Tubular Bandage, E#(8.75cm) x 10m
EM_0866 Elastic Tubular Bandage, F#(10cm) x 10m
EM_0867 Elastic Tubular Bandage, A#(12cm) x 10m
Features:
AD7061: Electrode Cleaning Solution in 230 ml Bottle
Material Safety Data Sheet (MSDS)
AD9315: Electrode holder for bench meters.
Electrode Rinse Solution in 230 ml Bottle.
Electrode Storage Solution in 230 ml Bottle
AD9072S: Electrolyte Solution for DO Galvanic Probe in 30 ml Bottle
AD9072: Electrolyte Solution for DO Galvanic Probe, 4 x30 ml
AD7071S: 3.5M KCl Electrolyte Solution for Refillable Electrodes, 30 ml
AD7082S: Electrode Refillable Solution 3.5M KCl, 30 ml
AD7082: Electrode Refillable Solution 3.5M KCl, 4 x 30 ml
Desiccant vial with flip-top lid
Water-resistant color chart
Customizable label
100 test strips
Bulk quantities available
The Extra High Level Peroxide test strip is calibrated at 0, 500, 1000, 2500, 5000, and 10000ppm, and gives results in 90 seconds. These strips are used to test concentration levels of Peroxide solutions used in cases where strong disinfection is needed. This test strip is designed to work with solutions prepared from concentrated hydrogen peroxide only. It should not be used to test solutions made using “accelerated” hydrogen peroxide products. These type of solutions require specially formulated test strips.
Test concentration levels of Peroxide where high levels of disinfection are needed.
Detection of quaternary ammonium compounds where higher levels of disinfection are required.
The DPD-FAS titration test kit measures Free and Total Chlorine in 0.2 ppm and 0.5 ppm increments. The distinct color change allows for accurate readings even at very low or high chlorine levels. The DipCell Color Comparator displays pH levels from 6.8 to 8.2 for 50 tests. The pH test is measured using liquid reagents.